Return To Home Page
Jacking Beam Accessories and Options

 

RAISER BLOCKS

Part No. 1527 to fit 2 and 2.8 tonne beam.

Part No. 1727 to fit 4 tonne beam.

Aluminium 95mm/3.25" high particularly useful when lifting some off-road vehicles and light vans.
 

Part No. 1532C to fit all scissor beams.

Extra high 180mm / 7" extensions - specially designed to facilitate safe lifting of vehicles with high axles and lifting points. Mainly high 4 wheel drive off road vehicles. Using this extension Part No. 1532C together with lifting pad Part No. 1532A (supplied standard on all scissor beams) a lifting height of 485mm / 19" can be achieved.

 

  

Part No. 1835 to fit 6 tonne beam 37mm / 1.5" high.
 

Part No. 1836 to fit 6 tonne beam 100mm / 4 " high.

 
NEW universal fitting for all makes of jacking beam
  

Part No. 1590C MOT Ramp Wheel Chocks.

Two component polyurethene chocks H65 x W295 x D170mm.

 

Two component polyurethane, rigid core and soft non-slip exterior which moulds to the car underbody. Light, strong, safe and easy to use.

A set of the three part numbers can be purchased using Part No. 1590.

 

Registered in England and Wales as: Majorlift Hydraulic Equipment Limited, Company Number: 01358382
Registered Office: Arnolds Field Estate, Wickwar, Wotton-Under-Edge, Gloucestershire, GL12 8JD

Telephone: (+44) 01454 299299    Fax: (+44) 01454 294003    Email: info@majorlift.com

Official Contractors and Suppliers to The Defence Procurement Agency (UK)
Company Information | Scissor Jacks | Commercial Jacks | Transmission Jacks | Low Height Bus Jack | Spares and After Service | Special Applications | Compac Products | Site Map