Majorlift UK - Commercial Jack Accessories and Options

Commercial Jack Accessories and Options

Making your operation quicker, safer and more efficient

Optional Diff. Beam
Allows use of both rams to lift maximum loads at one point. 
Safe working load 20 tonnes.
   Part No. 4500

Optional Double Extension Top Beam 
Makes jacking beam suitable for Class 4 and Class 7 MOT testing
and servicing. 
   Part No. 4600

Spreader Beam

This optional accessory is designed to accommodate vehicles with
independent front suspensions - particularly buses and coaches.

Another popular application is when springs need to be changed:
the vehicle can be jacked on the chassis.

The spreader beam also enables you to reach jacking points beyond
the width of your pit.

This accessory is available in three sizes, enabling it to comfortably
fit almost all pit widths and is rated up to 10 tonnes SWL. Shown
above with 450mm extension tubes and below with a lift-mounted
jacking beam.

 
   4250 spreader beam
   830mm(31") min pit width
   
   4350 spreader beam
   940mm (36") min pit width

   4450 spreader beam
   1070mm (42") min pit width


Supplied as standard Each beam is supplied comlplete with a full set of slip-on adaptors to assist in jacking axles, diffs and chassis etc. Available from stock as replacements.

	4101 V head Height 165mm 2 off 4102 Dished head Height 89mm 2 off 4103 Chassis head Height 54mm 2 off 4105 Ext. tube shoulder Height 152mm 2off

	Optional Extras 4107 Extension tube shoulder height 450mm (18") 4106 Extension tube shoulder height 250mm (10") 4104 Extension tube shoulder height 100mm (4") 4109 Ram end protector

Registered in England and Wales as: Majorlift Hydraulic Equipment Limited, Company Number: 01358382
Registered Office: Arnolds Field Estate, Wickwar, Wotton-Under-Edge, Gloucestershire, GL12 8JD

Telephone: (+44) 01454 299299 Fax: (+44) 01454 294003 Email: info@majorlift.com

Official Contractors and Suppliers to The Defence Procurement Agency (UK)